If you are using your CRAFT for the first time, starting a brew or cleaning session will take you through the steps of assembly and set up of your WiFi.

If this WiFi set up does not work for you, please follow the instructions below and perform them on your Base Station. This way you are able to connect to your WiFi. 

If you are experiencing trouble with your Smart Keg regarding an update, please perform these instructions on your Smart Keg only. So, not on your Base Station. 

Make sure you're not trying to connect to a 5 GHz network, as that is not supported by the MiniBrew.

  1. If your device has already been connected earlier, unplug it for a few seconds until the light goes out and then plug it back in.
  2. If it's still not connecting, or if it hasn't been connected yet, you need to set the WiFi credentials.
      1. To do that, hold down the button on the back of the device until the LED turns purple.
      2. See the images below where to find the button for your Base Station (left image) or your Smart Keg (right image). 
  3. button_on_the_back_base.jpg            image__3_.png 
  4. At this point, the machine is creating a WiFi hotspot called MiniBrew.
  5. Connect to this WiFi hotspot with your computer or iOS device. (You can do this in the Settings App on your phone under the WiFi settings.) 
  6. Once connected to the hotspot, the WiFi configuration window will open automatically. If it doesn't open automatically, click here to open it.
  7. Enter your WiFi SSID (network name) and password
  8. Once this is done, press the submit button
  9. After a few seconds, the LED on your device should turn green or pink.

If you get into a situation where you are asked to update your Smart Keg multiple times in a row, try leaving your keg plugged in and connected to the internet for at least half an hour before using it again.





Please sign in to leave a comment.